Water and Levels
Sensors, gateways and AI cameras, built to work together and with AiKuari IoT.
-
Dust and Noise Station VX-EN200
PM10, PM2.5 and noise at the quarry boundary.
-
Weather Station VX-WS500
Wind and rain for the dust rule and blast planning.
-
Blast Vibration Monitor VX-SG100
Ground vibration and air overpressure at the nearest homes.
-
Vibration Sensor VX-VB100
Vibration and bearing temperature on crushers and motors.
-
Probe Temperature Sensor VX-TP200
Bearings, lube oil and bitumen tanks.
-
Clamp Energy Meter VX-CT100
Clip on, no wiring: kWh per motor, per tonne.
-
Three-Phase Energy Meter VX-CT300
Crusher and conveyor drives, up to 1000 A.
-
Belt Scale VX-BS100
Tonnes per hour on every conveyor, live.
-
Aggregate Moisture Probe VX-MP100
Moisture in sand and cold-feed aggregate.
-
IO Controller VX-IO300
Switches sprinklers and pumps, reads plant signals.
-
Modbus Converter VX-MB100
Reads plant PLCs and meters without new cables.
-
Radar Level Sensor VX-RL410
Silos, bins and ponds, to the millimetre.
-
Ultrasonic Level Sensor VX-UL400
Non-contact level for sumps, tanks and hoppers.
-
Submersible Level Sensor VX-WL500
Depth for settling ponds and sumps.
-
Pipe Pressure Sensor VX-PP500
Pressure on dust suppression water lines.
-
SOS Button VX-BT100
One press calls for help, anywhere on site.
-
Door Sensor VX-DC300
Magazine, substation and gate doors, watched.
-
Tilt Sensor VX-TL320
Slopes, bench edges and conveyor gantries.
-
Asset Tracker VX-AT100
Where every loader, truck and generator is.
-
AI Safety Camera VX-CB100
Missing PPE and people in danger zones.
-
Thermal Camera VX-TC200
Hot idlers, drum hot spots and cold loads.
-
AI PTZ Camera VX-PT200
Pan, tilt and zoom across the pit and yard.
-
4G Solar Camera VX-CS400
A camera on any bench or haul road, no cables.
-
Plate Recognition Camera VX-TR500
Reads truck plates at the gate and weighbridge.
-
Network Video Recorder VX-NV800
Records every camera on site.
-
Outdoor Gateway VX-GW670
Covers the whole quarry from one mast.
-
Solar Gateway VX-GW500S
Off-grid coverage for remote pits and benches.
-
Indoor Gateway VX-GW650
For the plant office and motor control rooms.
-
Industrial 4G Router VX-RT320
Dual-SIM backhaul for cameras and gateways.
-
Industrial 5G Router VX-RT750
5G, Wi-Fi 6 and PoE for camera-heavy sites.
No devices in this category yet.
Not Sure Which Fits?
Tell us the site and what you need to know. We will spec it with you.
Questions About Devices.
Which devices work with AiKuari IoT?
VYROX sensors for dust and noise, weather, blast vibration, machine vibration and temperature, energy, belt scales, moisture, levels and pressure, safety buttons and trackers, AI cameras, gateways and 4G or 5G routers, plus compatible Modbus and RS-485 equipment you already own.
How do devices connect?
Through a VYROX site gateway over RS-485, Modbus RTU or TCP, serial or MQTT, through LoRaWAN for remote points, or over 4G and 5G routers where there is no cable.
Can we use sensors we already have?
Yes. Existing Modbus and RS-485 sensors, PLCs and meters can be read by the site gateway, and machine screens with no data output can be read by the Screen Scraper.
Are the devices built for quarry conditions?
VYROX field devices use sealed housings for dust, heat and tropical rain, and are installed and commissioned by the VYROX team.